On this page, we will guide you on how to install the official stock ROM flash file on your Micromax In Note 1. Well, the device runs out of the box with Android 10.0 which is powered by the MediaTek Helio G85 MT6769 processor. This guide will be helpful to unbrick or fix any software issues on your device.

To install the firmware flash file on Micromax In Note 1, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method simple and easy. We have also added video and step by step tutorial to make things easier to flash the firmware file.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Micromax In Note 1 Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Micromax In Note 1
  • You can fix the boot loop issue on Micromax In Note 1
  • Fix Unfortunately, the app has stopped error on Micromax In Note 1
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Micromax In Note 1
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Micromax In Note 1 back to Factory State

How to Flash Micromax In Note 1 Firmware File

Before installing the Stock ROM on your Micromax In Note 1, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

  • Supported device: Micromax In Note 1
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup of your android phone
  • Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Micromax USB Drivers

Download Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

Disclaimer:

  • Make sure you follow and download all the required files and flash tools on your PC.
  • Open the flash tool exe file to open the SP Flash Tool User Interface
  • Once your load the SP Flash tool UI, Tap on the Download option
  • In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
  • You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
  • Once you load the file, click the Download button
  • To start the upgrade process of stock ROM on your Micromax In Note 1, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware
  • You need to wait for a few minutes to complete the upgrade process.
  • Once the flashing process completes, you will find a green button which means a successful upgrade.
  • That’s it! You can reboot your Micromax In Note 1

Follow our full-depth video guide below:

Video Guide to Install Stock ROM via SP Flash Tool

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Micromax In Note 1 device successfully. Feel free to ask in the comments below for any queries.